Compact line Yoshida model 208 are made on high-quality manufacturing standard with some advanced features like three-stages arms,
single-point safety release, etc, but with competitive price
Features
• 4000kg (9,000 lbs) Capacity
• Dual hydraulic cylinders, designed and made on high standard, high quality seals.
• 4 three-stage arms are suitable for more vehicle.
• Aero cable used for synchronization.
• Self-lubricating UHMW Polyethylene sliders and bronze bush.
• Exclusive feature: single-point safety release by handle.
• Stackable rubber pad with 1.5" and 2.5" extension adaptors
• Automatic arms restraints
• Hydraulic power unit
Compact line Yoshida model 208 are made on high-quality manufacturing standard with some advanced features like three-stages arms,
single-point safety release, etc, but with competitive price
Features
• 4000kg (9,000 lbs) Capacity.
• Dual hydraulic cylinders, designed and made on high standard, high quality seals.
• 4 three-stage arms are suitable for more vehicles.
• Aero cable used for synchronization.
• Self-lubricating UHMW Polyethylene sliders and bronze bush.
• Single-point safety release, and dual safety design.
• Clearfloor design, provide unobstructed floor space.
• Overhead safety shutoff device.
• Stackable rubber pad with 1.5" and 2.5" extension adaptors.
• Automatic arms restraints.
• Hydraulic power unit.
Features
• 5000kg (11,000 lbs) Capacity.
• Dual hydraulic direct-drived cylinders,designed and made on high standard,high quality seals.
• Super Asymmetric arms allow to load different vehicles in an asymmetric or symmetric configuration.
• Aero cable used for synchronization.
• Self-lubricating UHMW Polyethylene sliders and bronze bush.
• Single-point safety release.
• Clearfloor design, provide unobstructed floor space.
• Overhead safety shut-off device.
• Automatic arms restraints.
• Adjustable height setting accommodate varying service ceiling heights.
• Stackable adapters 1.5”, 2.5”, 5”as standard.
CLEAR FLOOR DIRECT-DRIVED TWO-POST LIFT
Features
• 5500kg (12,000 Lbs) Capacity.
• Dual hydraulic direct-drived cylinders,designed and made on high standard,high quality oil seals for cylinder.
• Aero cable used for synchronization.
• 4 three-stage arms are suitable for more vehicles.
Hydraulic safety locks system instead of the mechanical safety locks, the SX07 is equipped with the safety stop device at the height of 300mm, both control buttons are needed to lower down the lift from 300mm to ground with tone alarm for safety.
Features
• 2-Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Automatic safety device controlled electrically.No air needed
• Hydraulic safety locks system instead of The mechanical safety locks
• Hydraulic equalization for easy access between ramps
• Electrical control system operated by Up or Down button
• Low profile design. The closed height is only 115mm
This SX08F is a true space-saving scissors car lift, when you don’t use the lift, it just hide into the ground. Unobstructed access points for easy entry and exit front, rear and both sides to increase work space below the lift and around the runways. The Lift of platforms are designed to be extended, it is suited for most of cars.
Features
• Electric/Hydraulic power system;
• Dual synchronous cylinders are applied to assure the lifting level on both platforms;
• Platforms are designed to be extended. It is suited for most of the car;
• Automatic safety device. The safety release is operated by air cylinders;
• Electro-air control cabinet;
• Hydraulic equalization, No torsion bar need.
Double Scissor Lift is ideal for easily and conveniently secondly lifting all wheels off the runway for brake, tire, suspension and two or four wheel alignment work.
Features
● Main scissors lifting capacity: 4000kg (9,000lbs)
● Secondly scissors lifting capacity: 4000kg (9,000lbs)
● Synchronization cylinders system equipped with hose burst valves.
● 24V control system with photocells device.
● The safety stop device at the height of 300mm, both control buttons are needed to lower down the lift from 300mm to ground with tone alarm for safety.
● Skid proof diamond runways and adjustable turnplate blocks.
● Self-lubricating UHMW polyethylene sliders and bronze bush.
The Heavy-duty scissors lifts use four cylinders to support and each both cylinders are designed working synchronously.
our four post lifts share the same name of quality, longevity, safety and with more flexible option. The Yoshida model 409A delivers the ultimate in convenience, versatility, safety and durability, you can raise your alignment business to peak performance levels. Capable of lifting vehicles weighing up to 9,000 lbs., the model 409A has the power and reliability to expand coverage from cars, light trucks, and most motor homes.
